Technical Features

BI-COMPONENT HEAD

WITH TRIPLE-TABS

Oggetto vettoriale avanzato-6

THE TRIPLE-TAB PATENTED SYSTEM IN DIFFERENT THICKNESSES (2-3-4 mm)

It's designed to form joints of various widths, by removing on the spot the tabs with greater thickness if necessary. For example, the support is ready for installation with 4 mm joints. For 3 mm joints, simply remove the 4 mm tabs and for 2 mm joints, remove the two widest tabs. The removal operation is quick and easy, simply manually or using ordinary pliers, thanks to the pre-incision of the tabs.
Queen-Riduce-Stock_1

SIMPLIFIES AND REDUCES STOCK

The exclusive system with triple tabs allows you to satisfy all installation needs with a single type of head, without variables related to the width of the joint.
This simplifies the warehouse stock and procurement phases.
Oggetto vettoriale avanzato-7

WIDER HEAD DIAMETER

Compared to standard bi-material head supports available on the market. With its 13 cm diameter, the Queen support head offers a surface able to perfectly sustain even heavier floors, with optimal load distribution.
Oggetto vettoriale avanzato-4

BLACK HEAD MADE OF BI-MATERIAL

With a high-quality plastic rubber coating that remains unaltered when exposed to high temperatures and the passage of time.

THE ELEVATION HAS SOLID BASES


ICONA QUEEN BASE RINFORZATA

REINFORCED THREADED BASE AND LARGE DIAMETER SCREW

The base - with a diameter of 21 cm - has a reinforced structure that allows the support to sustain ceramic floors of significant sizes, thicknesses and high loads. The diameter of the screw is rather wide at 115 mm, favouring the support’s capacity to bear a heavy load.
Oggetto vettoriale avanzato-9

EXTENSION OF THE SUPPORT

Queen’s 5 sizes offer an extension of heights from 21 mm to 234 mm. The excursion of the support screw is superimposed on the smaller or higher pedestal, offering ease of adjustment.
Queen-No-danni-membrana_1

IT DOES NOT DAMAGE THE WATERPROOFING

It does not damage the waterproofing even with a cut base. The bottom of the base has rounded edges and wide pre-cuts. The identification codes with the dimensional parameters of the support are printed on the surface.

QUEEN PLUS: THE EVOLUTIONARY ELEMENT


ICONA QUEEN BASCULANTE

QUEEN PLUS

It is an additional component that transforms Queen from a fixed support to a self-levelling one, with tilting head.
Exclusive in its simplicity and practical to use, the Queen Plus component is applied under the Queen head to allow it to tilt.
Queen-Compensa-5_1

COMPENSATES SLOPES

Compensates slopes up to 5%
Queen-Riduce-Stock_1

FURTHER OPTIMISATION OF THE STOCK

The reduction in stock is even more perceptible since, with the addition of a simple component, you can have fixed or selflevelling support within the same item.

DOWNLOAD THE PRODUCT CATALOGUE